INFINITY LUBE™ Products with Propriety HDI -2500 are Plant Based/Bio and Non-Toxic.
Infinity Lube Liquid Friction Eliminator (LFE), Super Spray and Super Grease are proven to increase the life of machinery and of oil.
Longer oil life/Cleaner used oil — Oil will last up to 3 to 5 times longer using Infinity Lube™ Liquid Friction Eliminator — reducing the frequency of disposing used oil and lowering operating expenses. Furthermore, the lack of metals and other harmful chemicals in all Infinity Lube™ products results in a cleaner discharge oil at the time of replacement.
Extend equipment life — not just extend equipment lifespan and operational uptime, but also decrease maintenance and replacement costs.
Environmentally responsible products second to none — The Fuel Ox® Infinity Lube™ family of lubricants is biobased and toxin free therefore safe for the environment
Infinity Lube™ is a revolutionary new form of lubricant that not only supplies superior lubrication but goes far beyond other conventional lubricants. Infinity Lube™’s proprietary formula conditions the metal itself. Unlike our competition, no coatings, fillers or other toxic paraffins are needed.
Most other lubricants have as their objectives water displacement and film lubrication which is oftentimes accomplished by utilizing environmentally unsafe chemistries. They attempt to reduce metal degradation, but the constant attacks by oxidation and acids on the metal surfaces means that more applications of the lubricant is required.
What Infinity Lube™ does differently, is that it conditions the metals first from within, which will then stop the metallurgical oxidation condensation catalysis.
What makes Infinity Lube™ different is its ability to successfully treat metal itself. The concept of treating metal is not new but it is very limited due to the reactions that occur. Most lubricants are made up of Chlorinated ions. Although they reduce friction the draw backs are numerous, including the creation of oxidation damage to metal. Infinity Lube™’s proprietary biobased formula creates a barrier that causes the surface of metal to change. Infinity Lube™ cleans the existing carbon from the friction points then increases the vulnerability of the metal to allow the initial friction to smooth and embed its unique components directly into the metal surfaces.
Infinity Lube™ primary ingredient is a forging fluid that creates case hardening on the peaks of the sub straights – precisely on the direct contacts of the friction points. They become harder, microscopically smoother, and an anionic charge is created between the metal that cause them to repel each other. Similar to two magnets with the same polarity, these two magnets float above each other reducing drag, friction, operating temperatures, and wear. This process of conditioning the metal begins to occur at a temperature of 98°F, leaving a new, stronger, harder surface which allows the overlying film strength to last up to 10 times longer or more. These pictures were taken with an Electron Microscope showing the before and after effects that Infinity Lube™ has on metal surfaces.
© 2022 International Environment Sustainability Group Limited – All rights reserved
